585,708 active members*
3,759 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > FeatureCAM CAD/CAM > Nakamura WT150 Post processor for Featurecam

Thread: Nakamura WT150 Post processor for Featurecam

Results 1 to 1 of 1
  1. 08-09-2019, 05:31 PM #1
    skatekris89
    skatekris89 is offline
    Join Date
    Aug 2019
    Posts
    1

    Nakamura WT150 Post processor for Featurecam

    Hi everyone,

    I've lost my Nakamura WT150 post processor. I was using it to generate my milling code for our Tornos swiss lathe. The Tornos post I have is complete crap so I've been working around it by posting my turning code with a Fanuc post processor, and my milling with a WT150 processor, then combining the two in Tisis.

    Can anyone help by any chance?

    Thanks in advance.
    Last edited by skatekris89; 08-09-2019 at 05:34 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules