584,830 active members*
5,608 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2011
    Posts
    333

    feed and speed for table surfacing bit

    I have a whiteside 6220 4 flute 2 inch diameter table surfacing bit. I am driving it with a 2.2kw spindle.
    What have you found to be a good feed rate, step over and spindle RPM for such a bit?
    I will be cutting baltic birch with no more than .020 depth of cut.
    Thanks

  2. #2
    Join Date
    Mar 2011
    Posts
    333

    Re: feed and speed for table surfacing bit

    bump somebody must have numbers for a bit like this?

Similar Threads

  1. Surfacing speed
    By SMW81 in forum Moldmaking
    Replies: 0
    Last Post: 08-01-2014, 03:03 PM
  2. X6 High speed surfacing toolpaths
    By bradleyban in forum Mastercam
    Replies: 8
    Last Post: 05-31-2013, 07:32 PM
  3. High speed surfacing.
    By themuffinman in forum MetalWork Discussion
    Replies: 4
    Last Post: 04-28-2011, 07:07 PM
  4. Replies: 2
    Last Post: 03-31-2010, 01:58 PM
  5. re-surfacing the cnc table top
    By woodman08 in forum Gorilla CNC Machines
    Replies: 0
    Last Post: 07-22-2009, 03:19 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •