584,798 active members*
4,320 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Autodesk CAM > ramp option not able to unlselect
Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2011
    Posts
    333

    ramp option not able to unlselect

    I have one tool path that is allowing me to select ramp or not
    Attachment 419780
    and one tool path that is forcing ramp on.
    Click image for larger version. 

Name:	ruth ramp preselected.jpg 
Views:	1 
Size:	55.2 KB 
ID:	419782

    I cant figure out what is forcing the ramping to be on.

    Can somebody point this out to me please?
    Thanks

  2. #2
    Join Date
    Nov 2014
    Posts
    729

    Re: ramp option not able to unlselect

    Same request as before - upload the file, please.

    David
    David
    Romans 3:23
    Etsy shop opened 12/1/17 - CurlyWoodShop

  3. #3
    Join Date
    Mar 2011
    Posts
    333

    Re: ramp option not able to unlselect

    here you go
    Attached Files Attached Files

  4. #4
    Join Date
    Dec 2013
    Posts
    5717

    Re: ramp option not able to unlselect

    Fusion assumes that you need to somehow ramp into a pocket, which is true. Therefore doesn't allow you to not use some kind of ramp in. It does allow the option of just plunging in, but some kind of ramp tool path is easier on the tools and machine.
    Jim Dawson
    Sandy, Oregon, USA

  5. #5
    Join Date
    Oct 2010
    Posts
    171

    Re: ramp option not able to unlselect

    Yep... as Jim said: just select "plunge" if you are confident that your cutter can handle it in the material you are cutting (and the speed that you are plunging).

    (... and if you choose to, you can just create another sketch with "points" or circles where you want to make the plunge move, then select those points at the bottom of the 5th tab page as the predrill or entry point.)

    Example included:
    Attached Files Attached Files

Similar Threads

  1. Replies: 0
    Last Post: 06-09-2016, 03:25 PM
  2. No ramp option when doing relief toolpath
    By tommy78 in forum Aspire
    Replies: 0
    Last Post: 11-30-2014, 09:39 AM
  3. Ramp?
    By tsaladyga in forum PTC Pro/Manufacture
    Replies: 2
    Last Post: 10-31-2013, 12:04 AM
  4. Ramp/Ramp out Contour help
    By ANorwood in forum Mastercam
    Replies: 10
    Last Post: 12-22-2012, 08:57 AM
  5. How can I ramp off....
    By gogego in forum Mastercam
    Replies: 6
    Last Post: 10-13-2011, 08:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •