Hey guys, I just bought my first laser cutter (yayyy!) and I need some advice on converting my 110v wall outlet to 220v.

This is the machine I purchased: https://www.aliexpress.com/item/4060...AbTest=ae803_3

It’s basically a generic 4060 60W co2 laser from china.

I’ve done some research, but due to my lack of knowledge and experience, I am unsure of the best course of action. I see 2 options

- New 110v power supply for the machine, to replace the 220v one. I am unsure if this would cause compatibility issues between the parts inside the machine, or even if the laser would work with a 110v supply. If this would require me to replace the current controller, I’d be totally fine with that. I’ve been looking to buy a new controller anyway.

- 110v to 220v transformer. This seems the most viable option to me, but I am unsure what wattage rating I should be looking for, and if I’m going to have issues with the wiring bottlenecking the amperage flow

Please, if anyone has experience with this, please advise me on the best option, your help would be much appreciated

Thanks for your time!