My 2.2 pin #4 has continuity with nothing. From what I've researched its probably an unconnected ground. Don't want to pull the back off this
rt now so I'm wondering - will I be OK just grounding the spindle case or mount block?
Thanks to all
cncneon
Results 1 to 3 of 3
Threaded View
-
05-15-2019, 03:03 PM #1
- Join Date
- Aug 2018
- Posts
- 29
Ground question on 2.2 kw water cooled spindle
Reply With QuoteSimilar Threads
-
Spindle ER11 water cooled VS. ER16 air cooled
By joaopcrodrigues in forum DIY CNC Router Table MachinesReplies: 5Last Post: 11-06-2018, 05:47 PM -
Crazy Idea - converting Air Cooled spindle to Water Cooled
By BanduraMaker in forum DIY CNC Router Table MachinesReplies: 19Last Post: 01-20-2018, 02:29 AM -
water cooled spindle vs air cooled
By ken2010 in forum Chinese MachinesReplies: 3Last Post: 10-21-2013, 06:03 PM -
2.2kw water cooled ground connection missing
By dfmiller in forum DIY CNC Router Table MachinesReplies: 5Last Post: 12-05-2011, 06:24 PM -
water cooled spindle question
By mccafferty in forum Open Source CNC Machine DesignsReplies: 2Last Post: 10-07-2009, 08:43 PM
Tags for this Thread
Posting Permissions
