512,292 active members
3,095 visitors online
Register for free
Login
IndustryArena Forum > CNC Electronics > Spindles / VFD > Huanyang spindle vs Zhong Hua Jiang spindle
Page 2 of 2 12
Results 13 to 14 of 14
  1. #13
    Registered
    Join Date
    Jul 2013
    Posts
    579

    Re: Huanyang spindle vs Zhong Hua Jiang spindle

    I wanted to come back here @macter54 to revisit the information you shared. As you know I have the 2.2KW spindle but I am going to try to send it back.
    I looked at the breakers that correspond to the room the machine is in at it is a 15A breaker. This room has several outlets running computer etc. This begs to ask the more important question. Should the plug the run the CNC control box and pc and VDF be on their own.

    To give you some background info. I am upgrading to a spindle because I wanted more cut accuracy/ better side finish and we able to cut alum. The 2.2KW with its 4 bearings seemed rigid enough for the job.

  2. #14
    Member
    Join Date
    Jan 2005
    Posts
    10680

    Re: Huanyang spindle vs Zhong Hua Jiang spindle

    Quote Originally Posted by FoxCNC1 View Post
    I wanted to come back here @macter54 to revisit the information you shared. As you know I have the 2.2KW spindle but I am going to try to send it back.
    I looked at the breakers that correspond to the room the machine is in at it is a 15A breaker. This room has several outlets running computer etc. This begs to ask the more important question. Should the plug the run the CNC control box and pc and VDF be on their own



    To give you some background info. I am upgrading to a spindle because I wanted more cut accuracy/ better side finish and we able to cut alum. The 2.2KW with its 4 bearings seemed rigid enough for the job.

    One supply for your machine yes on it's own is the best choice

    The machine should run from the same supply source or you will have a machine Grounding problem it can be done, but you can only use one Ground which is hard to do from 2 different outlets,a 15A supply and wiring in not going to work for a 2.2Kw 110v /120v supply, 800w spindle will run on a 15A circuit
    Mactec54

Page 2 of 2 12

Similar Threads

  1. Replies: 15
    Last Post: 05-07-2016, 12:48 AM
  2. Replies: 15
    Last Post: 05-10-2014, 08:16 AM
  3. 1.5kw spindle & Huanyang VFD
    By graphicideas1 in forum Spindles / VFD
    Replies: 12
    Last Post: 04-04-2014, 04:53 PM
  4. Help Help Help - Huanyang VFd and spindle
    By PsychoPig7 in forum Phase Converters
    Replies: 8
    Last Post: 06-19-2012, 09:54 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •