[Bazzer]

Does anyone know how to format BobCAD setup sheets so as that the various boxes relating to operations are not split over page breaks?

I have attached a typical example, I guess I am quite old school in that I would like decent printed setup sheets in my workshop.

Thanks

Barrie

[BurrMan]

Does anyone know how to format BobCAD setup sheets so as that the various boxes relating to operations are not split over page breaks?

I have attached a typical example, I guess I am quite old school in that I would like decent printed setup sheets in my workshop.

Thanks

Barrie

Hey Barrie,
So i have never seen bobcad output like that. Is that how you get it out of bobcad? It looks like a pdf printer is messing with how pagebreaks are happening...

Is bobcads setup sheet generator outputimg pdf now, or did you use a pdf printer for that....?

[Bazzer]

Hello Burrman

I used a PDF printer to enable the problem to be uploaded but exactly the same thing happens when printing to a windows printer either Kodak or more recently HP 7612.

No page breaks as you say.

Do you get page breaks?

regards

Barrie

[BurrMan]

Hello Burrman

I used a PDF printer to enable the problem to be uploaded but exactly the same thing happens when printing to a windows printer either Kodak or more recently HP 7612.

No page breaks as you say.

Do you get page breaks?

regards

Barrie

I understand now Barrie, i was just looking at the output from BobCad.

Let me do some printing and see if i can find anything that helps.....