Hi
My 2007 VMX42 is leaking oil out of the tool changer gear box, or around the shaft the arm mounts to (24 Pot tool changer).
Looks like I Have to replace the seal and the o' ring and then reset the arm, trouble here is that I cannot find how to realign the arm, anyone know how this is done?
The other problem I have is there appears to be two oil levels, one with a sight glass and if I am correct one a bit higher up with a clear plastic cover that is held on with SHCS, with what appears to be a level mark inside.
Oil I believe is ISO 32, but where are the two levels filled from as I cannot find a filler plug/plugs?
Any help greatly appreciated.
Best regards
Burgs