502,882 active members
5,065 visitors online
Register for free
Login
IndustryArena Forum > Tools / Tooling Technology > Work Fixtures / Hold-Down Solutions > Cutting drawer liner material with OTC, Holddown solution needed
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Nov 2011
    Posts
    16

    Cutting drawer liner material with OTC, Holddown solution needed

    I am considering fabricating a small series of partially irregular shaped drawer liners.
    I am planing of using a regular CNC Maschine equipped with an oszilating tangential knife. Coming from the woodworking side of things, machine, OTC etc are less of an issue. But how can I get the material down to be cut? Depending on the material there might be more or less friction. Double-sided tape is not an option I would consider. Any ideas or even better experience?

  2. #2

    Join Date
    Jun 2018
    Posts
    279

    Re: Cutting drawer liner material with OTC, Holddown solution needed

    A vacuum table sounds like it might be a good option.

Similar Threads

  1. Automatic Layout of Cutting Material software and Machine Cutting
    By Roctech-Cathy in forum Roctech CNC Routers
    Replies: 0
    Last Post: 07-21-2015, 08:48 AM
  2. Cutting silicone liner paper, multiple sheets.
    By benjaminleebate in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 7
    Last Post: 09-30-2013, 05:51 PM
  3. cutting drawer boxes
    By ant818 in forum Techno CNC
    Replies: 1
    Last Post: 11-27-2012, 01:25 PM
  4. Two stroke c/i liner material
    By Bob Monkhouse in forum General Material Machining Solutions
    Replies: 0
    Last Post: 12-10-2010, 08:13 PM
  5. cylinder liner material help
    By Hiredgun in forum I.C. Engines
    Replies: 1
    Last Post: 03-07-2010, 01:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •