507,846 active members
1,589 visitors online
Register for free
Login
IndustryArena Forum > CAD Software > Logic Trace CNC/DXF > digitize a full sized diagram using logic trace software and 3 jumbo drawing boards
Results 1 to 1 of 1
  1. #1
    Registered
    Join Date
    Oct 2007
    Posts
    760

    digitize a full sized diagram using logic trace software and 3 jumbo drawing boards

    this project was to demonstrate digitizing a 14 foot full sized paddleboard drawing and cnc
    cut it out and assemble it 75%

    https://youtu.be/xfZErB_xH10 drawing out a 14 foot paddleboard plan and cutting it out
    Attached Thumbnails Attached Thumbnails net7.jpg   net6.jpg   net5.jpg   net4.jpg   net3.jpg  

    net2.jpg  

Similar Threads

  1. jumbo 3 boards to digitize a 1968 Kayak Plan and build it
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 03-09-2019, 03:49 AM
  2. Using The 3 Jumbo Board Setup to trace a large full sized diagram
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 02-10-2019, 08:26 PM
  3. Replies: 0
    Last Post: 02-10-2019, 12:58 AM
  4. Replies: 0
    Last Post: 01-30-2018, 03:28 PM
  5. logic trace software and drawing boards
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 03-20-2014, 02:19 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •