584,871 active members*
5,365 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Milltronics > RW15 - Did i erased parameters?
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2018
    Posts
    4

    RW15 - Did i erased parameters?

    Good day, i erased almost all nc files in c/parts, but now i cant do a tool change nor a peck drill, it gives a 502:undefined canned cycle, i just want to know if i deleted the macros(?) Or something important, the machine is missing the recovery file and i talked with milltronics and the say it costs $100 so i want to be sure before i buy it. Thanks

  2. #2
    Join Date
    Jul 2010
    Posts
    548

    Re: RW15 - Did i erased parameters?

    unless someone made a "special" M or G code file to run, the peck id built into the software. the tool change macro should be located in the "TC" folder.

    call me 952-288-6340

    sportybob

Similar Threads

  1. My first 200 hrs with new rw15
    By panaceabea in forum Milltronics
    Replies: 25
    Last Post: 10-02-2022, 02:17 AM
  2. Milltronics RW15
    By TR MFG in forum Milltronics
    Replies: 9
    Last Post: 09-25-2022, 04:06 AM
  3. RW15 Toolholder Orientation
    By 8sigma in forum Milltronics
    Replies: 3
    Last Post: 11-05-2018, 01:56 AM
  4. Milltronics RW15
    By dcsten48 in forum Milltronics
    Replies: 6
    Last Post: 10-20-2011, 04:05 PM
  5. RENISHAW PROGRAMS ERASED
    By bildoo in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 09-21-2009, 08:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •