512,377 active members
3,233 visitors online
Register for free
Login
IndustryArena Forum > Laser Engraving and Cutting Machines > Laser Control Software > Raycus 30w Laser Software EZCad2.0 Calibration
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Apr 2019
    Posts
    1

    Raycus 30w Laser Software EZCad2.0 Calibration

    Hello, I just got a Raycus 30w Laser cutter/engraver from China. I can't seem to get it to calibrate right on the EZCad software that it comes with, in order to engrave a small text onto a charm. The text comes out inverted, like a mirror image. Does anyone know where I can find how to calibrate it? Is it out of focus? Do I need to focus it? completely lost. Does anyone know where I can start looking? Thank you so much.

  2. #2

    Re: Raycus 30w Laser Software EZCad2.0 Calibration

    Fibre laser sources do not react with paper, wood or fabrics.

    You want to test it on metals to see the reaction you get. The focus on a fibre laser is critical, potentially just +/- 0.25mm so it could just be that you do not have the correct focal position.

    It will be a pain, but you might just need to do some experimentation to find the optimum focus point.

  3. #3

    Re: Raycus 30w Laser Software EZCad2.0 Calibration

    Quote Originally Posted by LaserCutter2019 View Post
    Hello, I just got a Raycus 30w Laser cutter/engraver from China. I can't seem to get it to calibrate right on the EZCad software that it comes with, in order to engrave a small text onto a charm. The text comes out inverted, like a mirror image. Does anyone know where I can find how to calibrate it? Is it out of focus? Do I need to focus it? completely lost. Does anyone know where I can start looking? Thank you so much.
    https://cdn.shopify.com/s/files/1/13...ser_manual.pdf

    manual page 68-69
    Thank you.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •