Hello everyone!

I have a problem with AMADA APX100 (1995) and I need some advice. CNC Operateur -2, ATON LB450 motherboard. (KIT RETROFIT CPU486i / X40853 / C72346 - Carte mere assemblee / C72347 - Retrofit 486).

1. I need a floppy disk with the system (image) SYS1, SYS2, TOOLS. We bought the machine used a few years ago, and the previous owner lost the backup diskettes. System diskettes are probably the same for many AMADA machines with twin controls.

2. The program does not start completely: the computer is booted from the CF card, the driver is loaded, the validate.exe program (file check) starts. At some point (it seems to me that when checking plcn.exe) the screen turns black and the cursor flashes in the upper left corner.
The computer crashed while writing the program, and after the restart, the above situation occurred.
I am a servicer of cnc machines in our company, but with AMADA I do not have much experience.
Is the problem rather in the software, or, for example, the lack of communication after the RS232 with the module located in the electrical cabinet can cause such behavior?

3. Is it possible to connect a PS2 keyboard to this motherboard?
I will be grateful for the tips.

AMADAJOE, can you help me?