584,842 active members*
4,478 visitors online*
Register for free
Login

Thread: Depocam

Results 1 to 3 of 3
  1. #1
    Hello

    I’ve been working with Depocam for a short time. Could anybody tell me how tools can be defined and saved in the tool library?

    Thanks in advance
    Hurcofranzel

  2. #2
    Hello

    First of all create a new tool database in extras. Then make it standard database. The original one may be deleted.
    You have 2 possibilities for declaring of a milling cutter. You may declare a milling cutter in every milling strategy and save it; otherwise open your tool table under Extras and input your tools there. All required parameters will be requested during creation. It’s recommended to declare an appropriate materiate material for each milling cutter. It would later make the overview better.

  3. #3
    thank. for me this question was also relevant



    _______________________
    Fitness trainer, blogger https://fitness-eq.com
    Sport - is a life. Fitness - is a breath
    Last edited by Robert80202; 11-22-2019 at 08:03 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •