LightObject RTAF Real Time Auto Focus Laser head . Designed for non-metal CO2 laser machine
Universal design work with most laser machine. Stand alone unit. Work independently to laser controller

Attachment 420840




Auto Focus Head Specifications:

Length (two options): Choice of 50mm or 70mm

If you have a Power Z Table on a small to medium sized machine then we recommend the 50mm Traveling Distance Auto Focus Laser Head.

If you have a larger machine with a fixed Z table then we recommend the 70mm Traveling Distance Auto Focus Laser Head.

Height: 8 1/2"/21.6cm

Length: 7 1/2"/19cm

Width: 3 1/2"/8.9cm

Weight: ~5lbs

Speed (For Cutting): Up to 30 mm/s

Recommended Laser Tube Power Output: 60W or more

Required Mirror diameter: 25mm (not included)

Required Lens diameter: 20mm Diameter and 63.5mm Focal Length (not included)

Beam direction: Left to Right

Auto Focus Laser Head is ideal for cutting. It is not ideal for engraving due to the weight of the head. Slow engraving is possible.

Not compatible with K40 Laser Machines or machines missing 2 to 1 reduction gear.


Phone Support and Installation Walk Through Documents:

Phone Support (by appointment only): Up to 1 Hour

Phone Support is broken down in to four, 15 Minute Segments.

Each additional 15 Minute segment will cost $20

Link to scheduling phone support will be emailed after your Beta Auto Focus Laser Head is shipped out.



Mounting Kit (3x)

When we send out your Beta Auto Focus Head we will include your custom mounting kit.

If your custom mounting kit does not properly fit onto your laser machine, only email us at [email protected] with your problem and we will make another mounting kit for you.

You must pay for custom mounting kit replacement shipping and handling.

We can only do re-worked mounting kit replacements 2 times. If you continue to have problems with your re-worked mounting kit after the 2nd replacement, then we will charge $45 for each additional re-worked mounting kit.




See more info on LightObject.com