584,861 active members*
5,051 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > OneCNC > Need help with onocnc undercut machining
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2016
    Posts
    2

    Need help with onocnc undercut machining

    hi guys I'm having a bit of trouble and wondered if any of you could help me out, I'm using onecnc xr5 (need to upgrade really) I am trying to do a tapered slot with a rad bottom but as I'm using the lollipop cutter it seems to do dinting the bottom to a point the finishing doesn't seem to get out. I was wondering if anyone else has had this problem and can shine some light into what I might be doing wrong. I have tried to make the cutter higher but then it doesn't finishing the rad at the bottom and iv also tried all of the programmes like z level rough and planer finish and the bottom is a taper also. I have attached some pictures to show you what I mean and any help would be greatly appreciated.

    Ta in advanced Tom

    please don't worry about the sides at the top that's just because I made my block bigger the actual job.

  2. #2
    Join Date
    Jun 2019
    Posts
    3

    Re: Need help with onocnc undercut machining

    i would use end mill to z level rough then ball nose to planer finish.

Similar Threads

  1. 3D machining radiused undercut
    By Erikir in forum GibbsCAM
    Replies: 2
    Last Post: 04-22-2015, 03:53 PM
  2. V27 3 Axis Undercut
    By aldepoalo in forum BobCad-Cam
    Replies: 0
    Last Post: 01-16-2015, 11:55 PM
  3. How to reproduce undercut channels like this?
    By dalianharley in forum Tormach Personal CNC Mill
    Replies: 2
    Last Post: 06-06-2014, 03:10 AM
  4. Help undercut
    By togr in forum Mastercam
    Replies: 21
    Last Post: 04-26-2013, 05:43 AM
  5. Machining an undercut in Rhinocam?
    By mike stables in forum Rhino 3D
    Replies: 3
    Last Post: 01-22-2008, 01:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •