Quote Originally Posted by infamous_panda View Post
Thanks, I got tired of soaking my spoilboard with coolant and wd40. I used to have it set lower where I would not have to remove my vice when putting the spoilboard back. Unfortunately the long reach down causes some resonance and chatter issues on my machine, so I just screwed some blocks on the extrusion so I can reposition the vices repeatably in the same position.
Yeah, I like that idea as well. I was considering getting a ~1/2 - 1" thick aluminum plate made for the spoilboard and just drilling holes every inch or so, and then facing it. This would give me a nice base to mount parts to, and I could always attach a spoilboard to the top of that if I needed.