545,526 active members*
1,934 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Dmm Technology > Multicam retrofit journey
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Aug 2011
    Posts
    68

    Multicam retrofit journey

    Enjoying this retrofit so much i just have to share my experience. Im finally retrofitting my multicam router with some dmm servos,new ballscrews(in the mail),blocks, refurbished spindle and controller. The servos are fitted with the multiturn absolute encoders using batterypacks on the cable.

    In the end of the video before i removed the original stepper motor you can see the difference in size, maybe just me but dang dats hawt.

    https://youtu.be/OVG15dpQK-g

  2. #2
    Registered
    Join Date
    Sep 2014
    Posts
    14

    Re: Multicam retrofit journey

    How difficult was mounting the gearbox with this rack and pinion? Did you mount it where the large 9 inch pulley was?

  3. #3
    Registered
    Join Date
    Sep 2014
    Posts
    14

    Re: Multicam retrofit journey

    From your video i think you are using a steel angle. Did you add any extra support metal or screws?

    My bottom support looks like this:
    Attached Thumbnails Attached Thumbnails New AC servos on the Multicam router - YouTube.jpg   Photo Jul 23, 7 59 26 PM.jpg  

Similar Threads

  1. Old multicam mg205 retrofit
    By motogeeking in forum Multicam Machines
    Replies: 2
    Last Post: 06-10-2019, 10:09 PM
  2. Multicam 610 retrofit
    By Panovak in forum Multicam Machines
    Replies: 3
    Last Post: 02-17-2019, 06:49 PM
  3. Multicam Router Retrofit/Rebuild
    By motogeeking in forum Videos
    Replies: 0
    Last Post: 06-26-2017, 02:13 AM
  4. MULTICAM RETROFIT
    By orkh in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 11-26-2009, 09:55 AM
  5. Replies: 4
    Last Post: 07-03-2007, 02:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •