584,814 active members*
5,235 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2009
    Posts
    1863

    Full enclosure for PCNC 1100

    I have a full enclosure for my PCNC 1100 Series II that I want to take off my machine and go back to the old splash guard and table chip guard. So here’s my deal.

    If you’ll buy me the splash guard, table enclosure, one work table and pay shipping, and you can have this enclosure.

  2. #2
    Join Date
    May 2011
    Posts
    100

    Re: Full enclosure for PCNC 1100

    Hi Steve,

    Contact me by PM if you would, as I have extras of these items that you are welcome to, no exchange for your enclosure needed.

    I've tried to send a PM to you several times, but they don't appear to get through successfully.
    Maybe it will work if you initiate the PM.

    SquibLoad

  3. #3
    Join Date
    Mar 2009
    Posts
    1863
    Quote Originally Posted by SquibLoad View Post
    Hi Steve,

    Contact me by PM if you would, as I have extras of these items that you are welcome to, no exchange for your enclosure needed.

    I've tried to send a PM to you several times, but they don't appear to get through successfully.
    Maybe it will work if you initiate the PM.

    SquibLoad
    My fault. I seldom check my PM’s on here.

    I would like to work a trade with you. I don’t expect anything for free.

    I have the full enclosure, AND have the TTS rack and your monitor/computer rack. I paid about $2500 for the enclosure and then I spent about $700.00 with you. Ant I really don’t like the enclosure. It’s just too damned hard to get in and clean the machine.

    I’ll give you a call later today or tomorrow.
    You can buy GOOD PARTS or you can buy CHEAP PARTS, but you can't buy GOOD CHEAP PARTS.

Similar Threads

  1. Looking to unload my full enclosure for the 1100
    By Concepts_Design in forum Tormach Personal CNC Mill
    Replies: 1
    Last Post: 12-23-2018, 01:09 PM
  2. PCNC 1100 vs PCNC 770 (Is the 1100 worth it)
    By thunderdork in forum Tormach Personal CNC Mill
    Replies: 30
    Last Post: 09-21-2016, 08:43 PM
  3. Move control cabinet outside of enclosure PCNC 1100
    By Strip in forum Tormach Personal CNC Mill
    Replies: 3
    Last Post: 02-24-2016, 11:26 PM
  4. Tormach Enclosure, PCNC 1100
    By jeremyk409 in forum Tormach Personal CNC Mill
    Replies: 25
    Last Post: 01-08-2014, 12:09 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •