Hello all!
i have a Lead Cnc (https://openbuildspartstore.com/lead...010-40-x-40-1/). i want to do a bunch of stuff, one of which is cut angles for miter joints, like in the pictures attached out of 18mm birch ply. I understand it would take many passes and be slower than a table saw and some jigs but if i set it up right, is it possible to get these angles fairy close? Joints can be filled, sanded and painted, they wont be exposed.
Thanks Bran
Thread: Mitre Joints on Lead cnc
Results 1 to 3 of 3
-
11-04-2019, 03:23 AM #1
Member
- Join Date
- Nov 2019
- Posts
- 15
Mitre Joints on Lead cnc
Last edited by branrichards; 11-04-2019 at 03:26 AM.
-
11-04-2019, 06:01 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Mitre Joints on Lead cnc
You didn't attach any pics, but yes, you can cut miters no problem.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
11-05-2019, 02:10 AM #3
Member
- Join Date
- Nov 2019
- Posts
- 15
hmmm not sure why you cant seee them for me the attachments are right there, strange!
Reply With Quote
Posting Permissions
