502,653 active members
6,039 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2019
    Posts
    2

    Flow water jet path cut help

    New to the water jet cutting and looking for help in choosing the proper paths and fixing up a vector image.

    There are a bunch of lines not connecting and I am also trying to figure what the best way to cut the helmet part out would be so it gives a good strong image.


    Click image for larger version. 

Name:	Maximus.jpg 
Views:	3 
Size:	6.7 KB 
ID:	421519


    This is going to hang on my sons door and would like the sword blades to be solid and the letters attached to the line on the bottom.
    I am horrible at drawing and being artistic so really need help cleaning up the image connecting lines and taken lines out etc to give the best possible outcome when cutting on the water jet.

    Wanting the length to be around 16" and the height of the letters around 3 to 4 inches, and the swords/helmet being around the 6" height range.

    I am really new to the cam software etc, any and all help is greatly appreciated.


    Regards,
    Crown
    Last edited by crowndroyal; 06-04-2019 at 02:36 PM.

  2. #2

    Re: Flow water jet path cut help

    Shoot me an email wking@feainc.us . For some reason, it will not let me open the attachment. I would be glad to help you with this.

  3. #3
    Member
    Join Date
    Jun 2019
    Posts
    2
    Quote Originally Posted by FEAWaterjet View Post
    Shoot me an email. For some reason, it will not let me open the attachment. I would be glad to help you with this.

    That would be awesome thanks. will email you later today after I run some errands.I have your email copied down so you can remove it now if you wish so it is not public.
    Last edited by crowndroyal; 06-20-2019 at 04:00 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •