504,339 active members
4,370 visitors online
Register for free
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 0i TD lathe control, LCD screen going blank.
Results 1 to 2 of 2
  1. #1

    Fanuc 0i TD lathe control, LCD screen going blank.


    I have two CNC lathes with the Fanuc 0i TD lathe control. I have a problem with the LCD screen on the control going blank. This is not the screen saver blanking the screen after 10 minutes of non use, this is when we are programming the machine or making offset changes with the keypad when the machine is running.

    Nothing we do with key presses on the keypad will bring the screen back to life. The machine will continue to run, we can stop the program and re-start, but the screen is completely dead. The only way to get the screen back on again is to power cycle the NC.

    Any one seen this and have a solution?


  2. #2
    Join Date
    Dec 2009

    Re: Fanuc 0i TD lathe control, LCD screen going blank.

    try to change the inverter.

Similar Threads

  1. Mazak T Plus on QuickTurn 20 lathe: parity error and blank screen
    By karlinhigh in forum Mazak, Mitsubishi, Mazatrol
    Replies: 4
    Last Post: 10-13-2018, 08:50 AM
  2. Replies: 3
    Last Post: 06-13-2018, 12:48 PM
  3. Replies: 13
    Last Post: 01-30-2017, 08:05 AM
  4. Fanuc 11M Blank Screen
    By samachinetrades in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 10-21-2010, 05:43 AM
  5. Fanuc 3M Blank Screen
    By nastek in forum Fanuc
    Replies: 0
    Last Post: 10-31-2006, 02:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts