584,830 active members*
5,636 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Logic Trace CNC/DXF > logic trace 2018 selecting the command lines and arcs
Results 1 to 1 of 1
  1. #1
    Join Date
    Oct 2007
    Posts
    1010

    logic trace 2018 selecting the command lines and arcs

    I traced out a diagram using lines and arcs and showed where I selected line and where i selected arc
    I even put the cut part back on the diagram that I traced for a fit test

    lines and arcs of a diagram
    Attached Thumbnails Attached Thumbnails DSCF8698.jpg   DSCF8699.jpg   paper plan2.bmp  

Similar Threads

  1. logic Trace 2018 summary of the upgrade
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 8
    Last Post: 11-08-2018, 09:04 AM
  2. logic trace 2018 lines and arcs
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 11-08-2018, 03:34 AM
  3. Logic Trace 2018 re-scale a project drawing
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 10-04-2018, 08:20 PM
  4. logic trace 2018 using autoscale selection
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 10-04-2018, 06:52 PM
  5. logic trace 2018 difference between the pen and cursor
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 09-30-2018, 07:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •