Hi all!
Got my new pro series plug’n’play machine running but can’t seems to figure out how to get the spindle to run higher than 12000. I can adjust slower in Mach 3 but nothing higher than 12000. It should be able to run 24000.
Thanks!
Thread: Spindle speed
Results 1 to 9 of 9
Threaded View
-
06-09-2019, 06:15 PM #1
- Join Date
- Jun 2019
- Posts
- 5
Spindle speed
Reply With QuoteSimilar Threads
-
Spindle speed issue PRT-E750. Spontaneously speed floating.
By masv80 in forum Chinese MachinesReplies: 3Last Post: 04-20-2019, 11:24 PM -
New Low Speed Spindle - Top speed 12000 RPM - Shown milling aluminum
By PDJ in forum News AnnouncementsReplies: 0Last Post: 06-10-2016, 03:08 AM -
Fanuc AC Spindle Drive speed does not match S-code speed
By serickson in forum Spindles / VFDReplies: 2Last Post: 10-13-2014, 01:18 PM -
Help chosing a spindle speed sensor to indicate spindle speed in mach3
By Draax in forum Mach LatheReplies: 1Last Post: 08-02-2013, 10:07 PM -
BPSeriesI / Centroid control- Spindle speed all out of whack with speed dial?
By peter.blais in forum Bridgeport / Hardinge MillsReplies: 9Last Post: 08-08-2006, 09:29 AM
Tags for this Thread
Posting Permissions
