Hi all,
I have a 3040T-D and want to connect a tool sensor but ca not find where to connect it on the boards, all the info i find on the net are for a different board set up. Please can any one help. My box has a square transformer and 3 boards, cant find any ID on boards.
Thanks
Results 1 to 1 of 1
-
06-15-2019, 06:16 PM #1
- Join Date
- Jun 2019
- Posts
- 2
3040T-D 4 axis, Tool height sensor connections
Reply With QuoteSimilar Threads
-
Using a proximity sensor as a tool height setter...
By MavStone in forum DIY CNC Router Table MachinesReplies: 4Last Post: 03-16-2020, 01:02 PM -
Help with z axis height sensor
By alistair1537 in forum Chinese MachinesReplies: 6Last Post: 08-22-2018, 07:56 AM -
Automatic Tool Height Sensor input to KFLOP
By amitkumar171 in forum Dynomotion/Kflop/KanalogReplies: 9Last Post: 04-03-2018, 11:44 PM -
Tool height sensor calibration and implementation
By amitkumar171 in forum Dynomotion/Kflop/KanalogReplies: 1Last Post: 03-27-2018, 06:43 PM -
Tool Height Touch Sensor for Techno-Isel
By mikkojay in forum DIY CNC Router Table MachinesReplies: 8Last Post: 08-08-2006, 08:28 PM
Tags for this Thread
Posting Permissions
