Processing advantages and correct use of laser cutting machine
The laser cutting machine has a very good cutting effect, and has a very obvious flexible processing advantage compared with the traditional processing cutting, saving time, labor, high efficiency, high precision cutting, thus replacing the traditional cutting technology, and precision laser processing The technology is not like the traditional cutting technology, the need to use the mold, the use of not only increased cost, but also the cutting speed is very slow, so it was slowly eliminated. Due to the increasing use of metal materials, the use of laser cutting machines is becoming more widespread. This exclusive laser cutting machine is used in sheet metal processing, aviation, electronics, electrical appliances, automobiles, precision parts, craft gifts, kitchen utensils and other industries. It is not difficult to find that in the rapid development of the processing industry, stainless steel, carbon steel, aluminum, galvanized sheet, iron and other metal materials can also be cut quickly, accurately and efficiently.
How to use the laser cutting machine to cut out the effect?
1. The cooling system should be grounded, often cleaning the water tank and waterway. The temperature control point of the refrigeration temperature control water tank should be fair. Otherwise, the laser tube will be easily damaged and the dew condensation power will drop, the cold head of the tube will fall off, the service life will be shortened, and sometimes it will not work. Constantly changing the tube.
2. The laser tube installation fulcrum of the laser cutting machine should be reasonable. The fulcrum should be at 1/4 of the total length of the laser tube. Otherwise, the laser tube spot pattern will be deteriorated. Some working spots will become a few spots for a period of time, causing the laser power to drop. Meet the requirements, resulting in constant change of management.