585,662 active members*
3,291 visitors online*
Register for free
Login

Thread: 180i MB M code

Results 1 to 3 of 3
  1. 06-10-2019, 03:32 PM #1
    Boss002
    Boss002 is offline
    Join Date
    Jun 2019
    Posts
    2

    Question 180i MB M code

    M code decoded by PMC Ladder function decb.
    Custom Macro called by No.6080.

    M6 built-in program for tool exchange.
    I would like to replace built-in M6 by custom Macro M6.
    I modified PMC Ladder Address F10 for decode M code, No.6080 set 6.
    Hopefully could execute custom macro M6,
    I ran M6 several times, The M6 still called built-in M6 not custom macro M6.

    Why is that??
    Reply With Quote Reply With Quote
  2. 06-10-2019, 05:37 PM #2
    underthetire
    underthetire is offline Gold Member
    Join Date
    Feb 2009
    Posts
    6028

    Re: 180i MB M code

    Why not just use the Mcode macro call already built in the the Fanuc? No ladder mods needed. It's all in the manual, or here https://www.practicalmachinist.com/v...m-code-212156/
    Reply With Quote Reply With Quote
  3. 06-11-2019, 01:12 AM #3
    Boss002
    Boss002 is offline
    Join Date
    Jun 2019
    Posts
    2

    Re: 180i MB M code

    The Built-in M6 for robot arm, but the arm removed.
    The M6 mode change from auto to manual.
    I set several tools on the work platform and wrote custom macro.
    I wanna spindle could automatically grab the tools.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fanuc 180i Loop Counte
    By Boss001 in forum Parametric Programing
    Replies: 4
    Last Post: 02-23-2019, 04:33 PM
  2. 180I control
    By enginepilot007 in forum Fanuc
    Replies: 9
    Last Post: 10-05-2015, 01:40 PM
  3. Fanuc 180i/ New Ball screw
    By Gotemcity in forum Fanuc
    Replies: 0
    Last Post: 07-24-2015, 05:18 AM
  4. G68 Rotation problem on Fanuc 180i
    By btdmfg in forum Fanuc
    Replies: 2
    Last Post: 12-05-2008, 01:58 AM
  5. 180i-TB and 18i-TB
    By mr_electrician in forum Fanuc
    Replies: 2
    Last Post: 01-23-2008, 04:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules