Is there a DRO for G90/G91? Alternatively is there a toggle button OEM or is this just programmed with a macro?
Thread: DRO and toggles for G90 and G91
Results 1 to 4 of 4
-
06-10-2019, 09:17 PM #1
Registered
- Join Date
- Aug 2010
- Posts
- 599
DRO and toggles for G90 and G91
warmachinellc.com
-
06-10-2019, 10:09 PM #2
Registered
- Join Date
- Jan 2005
- Posts
- 1943
Re: DRO and toggles for G90 and G91
What you stated makes no sense to me as the DRO simply read the tool position in the current coordinate system and is independent ot G90/G91. Do you perhaps mean change the DRO for G20/G21 (inch/mm)?
Originally Posted by SWATH
-
06-10-2019, 11:23 PM #3
Registered
- Join Date
- Aug 2010
- Posts
- 599
Re: DRO and toggles for G90 and G91
Sorry, allow me to clarify. A DRO that reads the current mode (absolute or incremental). Actually I just found a much better way to implement what I was trying to do so I'm all set now. Thank you. Originally Posted by 109jb
warmachinellc.com
-
06-10-2019, 11:34 PM #4
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: DRO and toggles for G90 and G91
Code "G90" ?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With Quote
