We have an MB18 with Centurion 6. When starting the mill up and homing, this morning, the Z-axis homed normally, but X seemed to accelerate toward home rather than behaving normally and slowing down as it reached the limits. Has anyone had this happen? If so, what was the issue?

Looking at the diagnostics screens, X and Z report home switch as 1 (on or off, I don't know which) at the last e-stop, and Y reports home switch as 0. That said, I've never looked at the diagnostics screens before this, so I don't know what's "normal."

Here's a short video clip showing what happened when we manually moved the bed away from home, then re-homed.

https://youtu.be/oauqw1SLGb4