Re: Uneven cutting across the laser bed
If you leveled the worktable correctly, it should be a problem of aligning the mirrors.
If your machine does not cut in the whole right part (front and back) you should check the alignment between mirrors 2 and 3 (the one on the bridge and the one in the head), using the regulators of the second mirror and verifying that the lightning is striking in the middle of the third mirror on the right and on the left of the work table. Then you should use the regulators of the third mirror to regulate that the beam comes out correctly through the middle of the head.
I also recommend checking the lens cleaning.
Good luck!
I am an experienced laser technician.
User of laser cutting machine Buchicnc EVO 14.
User of laser recorder EVO 5.
CNC router user, with 3 x 2 m table Auto Tool Changer
I usually design my own laser files designs for laser cutter & laser engraver with CorelDraw, Laser Cut 5.3, RDWorks V8.
Laser cutters & CNC Routers BuchiCNC USA
CNC Router ATC
EVO 14
Soy tecnico de laser con experiencia.<br />Usuario de maquina de corte laser Buchicnc EVO 14.<br />Usuario de grabadora laser por fibra EVO 5.<br />Usuario de router CNC, con mesa de 3 x 2 mts Auto Tool Changer<br />Diseño mis propios archivos maquinas de corte laser con CorelDraw, LaserCut 5.3, RDWorks V8.<br /><a href="https://buchicnc.com" target="_blank">Estas son mis maquinas de corte láser BuchiCNC</a><br /><a href="https://buchicnc.com/producto/maquina-de-corte-laser-evo-14/" target="_blank">EVO 14</a><br /><a href="https://buchicnc.com/producto/maquina-de-corte-laser-evo-5/" target="_blank">EVO 5</a><br /><br /><a href="https://buchicnc.com/en/" target="_blank">Laser cutters & CNC Routers BuchiCNC USA</a><br /><a href="https://buchicnc.com/en/product/cnc-router-mr-atc-6-standard-line/" target="_blank">CNC Router ATC</a><br /><a href="https://buchicnc.com/en/product/laser-cutting-machine-evo-14/" target="_blank">EVO 14</a>