584,812 active members*
5,502 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > Peck tapping question for Fadal
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2015
    Posts
    26

    Peck tapping question for Fadal

    So, I learned since my first post about this below that the spindle WILL stay synchronized - someone told me about "peck tapping". But I'm still wondering - can I add an M1 between each command for increased Z depth to give me more time to blow off/out chips and add cutting oil to the hole - with out interrupting the spindle/feed synchronization?

  2. #2
    Join Date
    Dec 2012
    Posts
    3
    I just add a higher R in the g84 so it will raise up and give me time to blow **** out

Similar Threads

  1. Peck tapping
    By voytek1 in forum Fadal
    Replies: 3
    Last Post: 12-08-2016, 02:55 AM
  2. peck tapping
    By tobyike in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 02-12-2012, 07:43 PM
  3. peck tapping
    By bolton78 in forum MetalWork Discussion
    Replies: 0
    Last Post: 02-02-2010, 10:44 PM
  4. peck tapping
    By qmas99 in forum Surfcam
    Replies: 3
    Last Post: 01-17-2008, 12:26 PM
  5. Peck tapping
    By Mitsui Seiki in forum MetalWork Discussion
    Replies: 15
    Last Post: 11-28-2007, 04:30 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •