584,850 active members*
4,426 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hyundai Kia > vx400 tool changer recovery
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2010
    Posts
    2

    vx400 tool changer recovery

    We just picked up 2 used vx400's. Trying to get first machine going. Tried a tool change and it stopped with the tool change arm rotated to the spindle and errored there. How do I recover this? I can't enter anything in MDI. The Z is not homed out. Manual tells me to hit start cycle and magazine select button to get into recovery mode, but doesn't seem to work?

    Any tips? Can this be rotated back to position manually?

  2. #2
    Join Date
    Sep 2010
    Posts
    2

    Re: vx400 tool changer recovery

    I have the procedure to get through this and I was doing it wrong before apparently and just now got it to move the arm. So now it is swung into position to take a tool out of the spindle. I hit Z- and I can hear a click, the solenoid? clicking like its telling it to eject the tool. But nothing happens, just that click. No sound of air, nothing.

    thoughts?

Similar Threads

  1. Tool changer recovery VM25 7 control
    By positiverake in forum Milltronics
    Replies: 0
    Last Post: 05-24-2019, 02:15 AM
  2. Daewoo 3016 Tool Changer Recovery
    By rpm3000 in forum Daewoo/Doosan
    Replies: 2
    Last Post: 04-25-2013, 10:29 PM
  3. VX400 fanuc tool pre stage
    By jacep in forum Hyundai Kia
    Replies: 1
    Last Post: 11-30-2011, 05:46 AM
  4. tool changer recovery
    By peakeng in forum Daewoo/Doosan
    Replies: 2
    Last Post: 03-06-2009, 08:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •