584,849 active members*
4,457 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > G-Code Programing > are there any code to tap 1" pipe thread?
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2016
    Posts
    4

    are there any code to tap 1" pipe thread?

    I need tap 1" pipe thread hole on my milling machine by fly cutter, any G-code to do it?
    Thanks

  2. #2
    Join Date
    Dec 2013
    Posts
    5717

    Re: are there any code to tap 1" pipe thread?

    It's possible to do this with a thread mill cutter, or I guess you could use a fly cutter if it was small enough.

    Does your machine controller support thread milling? What CAM software are you using? Does it support thread milling?
    Jim Dawson
    Sandy, Oregon, USA

  3. #3
    Join Date
    Dec 2019
    Posts
    1
    Are there any code to tap 1 then tell what you take from pipe thread? These are the best thread for resume writing services and we were taking help from all my old work. And that are the best things so we have to start to do work according to the pipr thread.

Similar Threads

  1. TL-3 Pipe Thread ??? Please Help !!!
    By trangt143 in forum Haas Lathes
    Replies: 1
    Last Post: 04-20-2016, 05:50 AM
  2. Pipe thread
    By jdgromi in forum Fanuc
    Replies: 12
    Last Post: 02-15-2010, 05:52 AM
  3. 1/4-18 PIPE THREAD
    By Get lucky in forum G-Code Programing
    Replies: 18
    Last Post: 02-04-2009, 12:45 PM
  4. Pipe Thread
    By harley88 in forum Haas Mills
    Replies: 2
    Last Post: 11-29-2005, 05:43 PM
  5. NPT pipe thread
    By positiverake in forum MetalWork Discussion
    Replies: 2
    Last Post: 10-29-2005, 03:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •