Hi Mates,
Few years ago I built a 50W machine with Buildlog.net. Did this with a Trocen DSP controller - very good results however costly...Very...
Building a new machine - 80-100W - and my question is - Will GRBL 1.1 Laser controller will be safe to use with the high currents ?
Is there anyone going this way and can share some insights?
Cheers
Isaac
Results 1 to 1 of 1
-
06-11-2019, 10:13 PM #1
Member
- Join Date
- Feb 2011
- Posts
- 7
New 80-100W machine - GRBL or DSP
Reply With QuoteSimilar Threads
-
50W and 100W fiber laser marking machine.
By oneeye in forum Brazilian Club HouseReplies: 0Last Post: 06-15-2017, 04:14 PM -
any one that knows Audrino and grbl shield with grbl pannel?....
By flipcmc1 in forum ArduinoReplies: 1Last Post: 08-19-2016, 11:57 AM -
100W laser engraving/cutting machine
By lasertube in forum Commercial LaserReplies: 0Last Post: 06-11-2014, 06:30 PM -
Looking for advice on 100w + laser machine purchase.
By Robot Dude in forum Laser Engraving / Cutting Machine General TopicsReplies: 21Last Post: 12-20-2011, 10:17 PM -
100W, 300W Spindle for Small Machine
By automationtechinc in forum Automation Technology ProductsReplies: 1Last Post: 10-30-2010, 07:41 PM
Tags for this Thread
Posting Permissions
