584,866 active members*
4,924 visitors online*
Register for free
Login

Thread: blockages

Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2019
    Posts
    2

    blockages

    hi all,


    Having recently put in a .030" mixing tube for the job, it keeps on blocking up after about 30 seconds. the material is 1.25mm stainless steel. normally we use a .040" mixing tube which rarely has blockages apart from the standard, but with this .30" mixing tube we cannot even cut one part out.

    any ideas?

    thanks

  2. #2
    Join Date
    Jun 2019
    Posts
    1
    Quote Originally Posted by dickens28 View Post
    hi all,


    Having recently put in a .030" mixing tube for the job, it keeps on blocking up after about 30 seconds. the material is 1.25mm stainless steel. normally we use a .040" mixing tube which rarely has blockages apart from the standard, but with this .30" mixing tube we cannot even cut one part out.

    any ideas?

    thanks
    Try running a less course garnet or slow down your abrasive feed rate.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •