584,805 active members*
4,987 visitors online*
Register for free
Login
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Aug 2010
    Posts
    686

    Small Part CNC Plasma Cutting Fixture

    This is my second generation Small part plasma cutting fixture.
    Attachment 422480

    The heart of the fixture is the support bracket. Here is a little video I made making one of the brackets and testing the fixture.
    https://youtu.be/Qb1a3cxCT9w

    The fixture supports both flat stock and angle as shown here.
    Attachment 422482
    Attachment 422484

    The full write up can be found here.
    Make a Simple Plasma Fixture — Kronos Robotics
    Author of: The KRMx01 CNC Books, The KRMx02 CNC Books, The KRmc01 CNC Milling Machine Books, and Building the HANS Electric Gear Clock. All available at www.kronosrobotics.com

  2. #2
    Join Date
    Aug 2010
    Posts
    686

    Re: Small Part CNC Plasma Cutting Fixture

    Update
    I have added a couple small parts to the fixture to help with securing the stock.
    Attachment 422486

    These are probably some of the smallest parts I have made with my plasma cnc. I am very happy with the results.

    Here is a little video of the process.
    https://youtu.be/qrV5DekQHeM

    These were cut with my Everlast 50s on a CNCCS machine with Harbor Freight 40Amp consumables. I cant wait to try cutting them out using my Hypertherm machine using finecut consumables.

    I added the holding arms to my write-up (near the end) here:
    https://www.kronosrobotics.com/cnccsplasmafixture
    Author of: The KRMx01 CNC Books, The KRMx02 CNC Books, The KRmc01 CNC Milling Machine Books, and Building the HANS Electric Gear Clock. All available at www.kronosrobotics.com

Similar Threads

  1. tracing out a metal part and plasma cutting it
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 05-10-2017, 12:35 AM
  2. Do Big Things Well, By Small CNC Plasma Cutting Machine
    By Bill Levis in forum South Africa Club House
    Replies: 0
    Last Post: 11-27-2014, 07:26 AM
  3. CNC Plasma Cutting: Connect Part Command
    By Ajancnc in forum Videos
    Replies: 0
    Last Post: 10-16-2014, 05:58 AM
  4. Small part fixture
    By l u k e in forum Work Fixtures / Hold-Down Solutions
    Replies: 8
    Last Post: 01-31-2013, 05:16 PM
  5. new stand alone THC for small plasma cutting machine
    By larryy1022 in forum News Announcements
    Replies: 5
    Last Post: 01-20-2012, 03:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •