Need some help please. G-code generated by the post processor I have will not cut a straight line from point A to point B. For example, if a line is programmed to start at point A (X 0.000”, Y 0.000”) and travel to point B (X 10.000”, Y 0.000”) the resulting line will be skewed off by some amount. The resulting line may give a point ending at C (X 10.000”, Y 0.200”). This error occurs in both X and Y directions of travel with unpredictable outcomes. Talked with folks at Bobcad,but they say it will take 2-4 weeks to modify a post for me.
Anyone have a post they can share?
Results 1 to 4 of 4
-
06-18-2019, 07:54 PM #1
- Join Date
- Jun 2019
- Posts
- 2
Need BobCad V30 post for Milltronics Centurion 7
-
06-24-2019, 09:54 AM #2
Member
- Join Date
- Feb 2013
- Posts
- 677
Re: Need BobCad V30 post for Milltronics Centurion 7
Does the post processor actually create the values X 10.000”, Y 0.200” in the code?
-
09-14-2019, 02:40 AM #3
Registered
- Join Date
- Mar 2017
- Posts
- 63
Re: Need BobCad V30 post for Milltronics Centurion 7
Are you using cutter comp? You have to have a lead in.
Sent from my SM-N960U using Tapatalk
-
09-14-2019, 03:02 AM #4
Registered
- Join Date
- Mar 2017
- Posts
- 63
Re: Need BobCad V30 post for Milltronics Centurion 7
Also i have a post processor for bobcad v30
Sent from my SM-N960U using Tapatalk
Reply With QuoteSimilar Threads
-
Post Processor for Centurion V milltronics
By holeshot in forum Dolphin CAD/CAMReplies: 1Last Post: 02-05-2016, 05:29 PM -
centurion 6 MB19 Milltronics Post help
By j65giles in forum MilltronicsReplies: 3Last Post: 11-09-2014, 01:09 AM -
Need post processor for Milltronics RW15 centurion 7 control
By hoganj in forum MilltronicsReplies: 3Last Post: 03-27-2010, 03:47 AM -
Need post for Milltronics / Centurion 7 mill
By hoganj in forum CamWorksReplies: 1Last Post: 03-25-2010, 10:05 PM
Tags for this Thread
Posting Permissions
