510,093 active members
2,888 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Apr 2005
    Posts
    496

    UCC Software - Turning? -- Multiple MPGs?

    Good morning all,

    I looked over the website and even the DOCs but still not sure (perhaps because I want this)...

    Is the UCC software able to control lathes?

    Can two MPGs be used at the same time with the UCC software?

    Thanks

    Chris

  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    34612

    Re: UCC Software - Turning? -- Multiple MPGs?

    There is no lathe mode, but some people have used it for lathes.

    UCCNC currently only supports one MPG.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Registered
    Join Date
    Apr 2005
    Posts
    496

    Re: UCC Software - Turning? -- Multiple MPGs?

    Thanks Gerry,

    I was afraid of that. I guess it is time to look into LinuxCNC.

    Chris D

Similar Threads

  1. Turning multiple parts from Bar in one program.
    By destroyer125 in forum G-Code Programing
    Replies: 13
    Last Post: 11-21-2017, 05:23 PM
  2. Solidcam Turning multiple coordsys
    By claudiu220405 in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 7
    Last Post: 02-22-2016, 04:06 PM
  3. Multiple Similar Profiles - CNC Turning SolidCAM
    By mr chris in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 3
    Last Post: 01-04-2011, 11:20 PM
  4. Turning Multiple Similar but not Identical parts
    By mr chris in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 15
    Last Post: 03-18-2010, 06:32 PM
  5. 80mm and 60mm MPGs now in Stock
    By phomann in forum News Announcements
    Replies: 1
    Last Post: 02-14-2008, 06:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •