584,842 active members*
4,512 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Milling > Help Milling Round Mould
Results 1 to 2 of 2

Threaded View

  1. #1
    Join Date
    Feb 2019
    Posts
    1

    Help Milling Round Mould

    Hello,

    I am a beginner with milling so any help is welcomed.

    I need to make some round moulds in a steel stock.

    I have an old machine with limited memory capacity and that is why I am using 2d pocket strategies to do the roughing.


    My stepdown is 1 mm, I dont dare to use more.

    My issue is that it takes to long to machine the parts.
    Also another big problem is that the tip of my end mills gets destroyed very often.


    So my question is. What is the best strategy to open these pockets?
    Someone suggested to do a pre drill hole. But I dont see how this helps.
    Attached Thumbnails Attached Thumbnails ROUGHING.jpg   1.JPG   2.JPG   3.JPG  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •