584,814 active members*
5,284 visitors online*
Register for free
Login
Results 1 to 10 of 10
  1. #1
    Join Date
    Aug 2016
    Posts
    185

    C11G Board issues

    I wanted to see if anyone else has had issues with the NEW C11G boards. I got my first one and if the PC was not in "run" condition the Relays screamed and the analog voltage was zero. I was sent a second board which still had the relay screaming. Then they sent me a third board and it worked for about a month now its doing the samething.

    Anybody else got these issue or am I just the lucky guy?

  2. #2

    Re: C11G Board issues

    Please tell me more. Do you have a ticket number?
    Arturo Duncan
    https://cnc4pc.com

  3. #3
    Join Date
    Aug 2016
    Posts
    185

    Re: C11G Board issues

    Quote Originally Posted by arturod View Post
    Please tell me more. Do you have a ticket number?
    Arturo Duncan
    https://cnc4pc.com
    No I was trying to see if this is my setup. This board is starting to do the samething the other 2 you sent me were doing. Can you tell me what is wrong?

  4. #4

    Re: C11G Board issues

    I have no idea of who this is. You talk about a problem with a C11G board that we sent. I do not recall a case of bad C11G? You talk about several boards? I have no clue.

    Arturo Duncan
    https://cnc4pc.com

  5. #5
    Join Date
    Aug 2016
    Posts
    185

    Re: C11G Board issues

    Quote Originally Posted by arturod View Post
    I have no idea of who this is. You talk about a problem with a C11G board that we sent. I do not recall a case of bad C11G? You talk about several boards? I have no clue.

    Arturo Duncan
    https://cnc4pc.com
    Neil Cunningham in Charlotte NC

    I was the one that reported the screaming relay. Then you sent me a working board and now that board is starting to do as the others. I just wondered what you found and could my setup be an issue. I have had this third board for a month or so.
    I had put in ticket numbers for the other boards...

  6. #6

    Re: C11G Board issues

    Neil,
    YES!!! I remember you. I remember the case with a batch of boards due to a resistor out of specs. As far as I can tell off the top of my head, we replaced all those boards. What is the issue you are having now?

    Arturo Duncan
    https://cnc4pc.com

  7. #7
    Join Date
    Aug 2016
    Posts
    185

    Re: C11G Board issues

    Yes you did .. but the new board is starting to do the same thing.

    Not every time but it has happened a couple of times when I started up the controller. When MACH get control the issue always stops..

    Sent from my XT1635-01 using Tapatalk

  8. #8
    ericks Guest

    Re: C11G Board issues

    My 11G board does the same thing....actually i am not using it any more but i did notice it when i used it from the start.

  9. #9
    Join Date
    Aug 2016
    Posts
    185

    Re: C11G Board issues

    Quote Originally Posted by ericks View Post
    My 11G board does the same thing....actually i am not using it any more but i did notice it when i used it from the start.
    How old is your board

    Sent from my XT1635-01 using Tapatalk

  10. #10
    ericks Guest
    Quote Originally Posted by truckeic View Post
    How old is your board

    Sent from my XT1635-01 using Tapatalk
    Less than six months

Similar Threads

  1. Output connections on a C11G- MULTIFUNCTION CNC BOARD
    By CStevens6 in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 04-08-2013, 01:54 AM
  2. C11G board on G0704 Conversion experiences?
    By lcvette in forum Benchtop Machines
    Replies: 5
    Last Post: 01-11-2012, 06:55 PM
  3. CNC4PC C11G BOARD
    By MegaMoog in forum Benchtop Machines
    Replies: 1
    Last Post: 05-05-2010, 09:29 PM
  4. C11G board stupid questions....
    By pete from TN in forum Benchtop Machines
    Replies: 12
    Last Post: 02-15-2010, 12:20 AM
  5. KL-B25 or C11g Breakout board?
    By technosteve in forum Automation Technology Products
    Replies: 1
    Last Post: 03-14-2009, 01:32 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •