With this "Combo" laser machine, it can cut up to 2mm stainless steel,4mm mild steel, or 1mm aluminum with great finished (no tumbling machine required afte cut) . It is dual laser head design; fiber laser head + CO2 laser head. That being said, after making cuts on metal, you can switch to non-metal materials like plywood, MDF, or acrylic without switching parts. It handles 1/2" MDF or 12mm acrylic (not limited to) with a 130W CO2 laser that make job easy. A demo unit will be available by the end of July. Free feel to send us sample for us to test or come over to our facility to run demo in person.

Attachment 420890
Attachment 420892



One Stop Solution for Laser
LightObject
https://www.LightObject.com