584,850 active members*
4,266 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2019
    Posts
    5

    95 Charmilles RoboFil 310

    Machine has sit for 3 years until they hired me, and now its up and running but I need some help. I have been doing every aspect of machining for 10 years, but Wire EDM is new to me.
    So just got the machine back up and running, and I'm doing a HUGE clean up on the inside.

    Question:
    Mastercam 2018
    So when your setting up you power settings
    In the program what do you put in for the 3 Digits that MasterCam ask for?
    Because the TEC Files are like this LS25A
    Attached Thumbnails Attached Thumbnails Capture20.PNG  

  2. #2
    Join Date
    Sep 2010
    Posts
    6

    Re: 95 Charmilles RoboFil 310

    I'm not familiar with master cam, but I would assume the 3 digit number would be to pull up your E setting from the active .tec file. Example 501, 502 for a tec with 1 rough and 1 skim.

    In my attachment I'm using Esprit to call up KEY.tec and then E501 for the rough and E502 for the skim.
    Attachment 423040

  3. #3
    Join Date
    Jun 2019
    Posts
    5

    Re: 95 Charmilles RoboFil 310

    Thanks I was looking at old programs the last guy made and I think I remember seeing E501 and such. I will go back and look at it again thanks.

Similar Threads

  1. Charmilles Robofil 400
    By yacino in forum Waterjet General Topics
    Replies: 0
    Last Post: 10-03-2018, 06:47 PM
  2. Charmilles Robofil Wire Edm
    By sundara in forum EDM Discussion General Topics
    Replies: 12
    Last Post: 08-01-2017, 09:56 PM
  3. charmilles robofil 290
    By zekry10 in forum EDM Discussion General Topics
    Replies: 1
    Last Post: 02-24-2016, 02:25 AM
  4. DNC CHARMILLES ROBOFIL 310
    By tecnomaqq in forum EDM Discussion General Topics
    Replies: 0
    Last Post: 01-17-2014, 04:34 AM
  5. charmilles Robofil 190 or charmilles Robofil 290
    By Fontez in forum Post Processors for MC
    Replies: 0
    Last Post: 03-12-2013, 04:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •