Hy there.
We are retrofitting Gsk 980 tdc controller with lathe machine. The problem is when we turn on the power and give pulses to axis with MPG it both axis start vibrating with a thrust. Please tell us what to do..?
Results 1 to 1 of 1
Threaded View
-
06-28-2019, 08:30 AM #1
- Join Date
- Jun 2019
- Posts
- 1
Gsk 980tdc servo drive vibrate with thrust when give pulses with MPG.
Similar Threads
-
Servo drive doesn't see step/dir pulses
By Alekmalek in forum Servo Motors / DrivesReplies: 0Last Post: 02-15-2018, 03:11 PM -
No encoder pulses detected on VSD-E 160 drive. Ideas?
By MrMetric in forum CNC Machine Related ElectronicsReplies: 49Last Post: 11-05-2014, 06:53 PM -
Can servo motor give continuous rotaion
By ishaqahmed in forum Servo Motors / DrivesReplies: 2Last Post: 12-17-2011, 08:03 PM -
Thrust bearings and drive mounting...
By JD_Mortal in forum DIY CNC Router Table MachinesReplies: 4Last Post: 11-16-2010, 04:04 PM -
Controlling Servo Drives With Pulses
By Mert-G in forum Servo Motors / DrivesReplies: 3Last Post: 02-04-2008, 11:50 PM
Tags for this Thread
Posting Permissions
