504,567 active members
4,135 visitors online
Register for free
Login
Page 3 of 3 123
Results 25 to 26 of 26
  1. #25
    Registered
    Join Date
    Apr 2005
    Posts
    84

    Re: NCStudio OR Controller

    If you have a laptop that is from era of Methusalem, then you might be out of luck that it has autodetect possibility.

    Any decent laptop will autodetect the cable type.

    BTW Bentley is overkill for short hops, better try Yugo
    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.

  2. #26
    Registered
    Join Date
    Sep 2009
    Posts
    274

    Re: NCStudio OR Controller

    Quote Originally Posted by ZASto View Post
    If you have a laptop that is from era of Methusalem, then you might be out of luck that it has autodetect possibility.

    Any decent laptop will autodetect the cable type.

    BTW Bentley is overkill for short hops, better try Yugo
    Thanks. I'll have a descent laptop.

    Bentley is never overkill

    Sent from my SM-N960F using Tapatalk

Page 3 of 3 123

Similar Threads

  1. NCStudio help.
    By bfamily in forum Chinese Machines
    Replies: 2
    Last Post: 10-13-2017, 02:29 PM
  2. Weihong ncstudio CNC controller card Driver help!
    By xchiazyx in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 10-04-2016, 02:41 PM
  3. ncstudio v9
    By crazy_dreams in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 03-12-2016, 03:11 PM
  4. NcStudio help
    By Dhashna in forum Chinese Machines
    Replies: 0
    Last Post: 11-26-2013, 08:34 PM
  5. Ncstudio help
    By bachaar in forum Chinese Machines
    Replies: 0
    Last Post: 02-24-2013, 09:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •