Would anyone share Fanuc 21i-MA ladder which uses the following unit.

A06B-6096-H### (Servo Amplifier)
A06B-6078-H206 (Spindle Amplifier)
A06B-6081-H106 (Power Supply)
A06B-6089-H711 (Discharge Resistor)

Trying to test Alpha motor A12/2000

Or anyone can guide me where to find the problem. My current 21i flashing "EMG ALM", there is no alarm on display. I haven't used this system before. It's kind a new built. Attached is Fladder file.

Hope someone will help me out.

Your help greatly appreciated.