584,826 active members*
5,203 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1

    Full Spectrum Laser 40W 4th Gen - Dead USB

    Hi - I have a 4th gen FSL laser. It appears that the mini USB connector is delaminating from the PCB (top board in pic). FSL is checking to see if they have a replacement board, but they've already mentioned a $750 cost for replacing this thing. Other than the dead board, the laser works well enough especially for its age.

    My questions:

    1) The board has a DB9 connector pinout exposed - does anyone know if I could use a USB --> Serial and connect to the DB9 pinouts to avoid the USB situation?

    2) Any recommendations on an alternative controller board to drive the laser instead? For giggles I picked up a cheap GRBL board on amazon that seems capable of running the stepper motors, but I'm not clear how (or if) I can use it to turn on the laser. Does anyone have a pinout explanation for the laser driver and what pins I need to talk via to drive the laser?

    3) If I can't figure out how to talk GRBL or eqiv to the laser controller, I was considering using the spindle on/off relay on the GRBL board and wire the relay around the physical "laser test" switch. I mostly cut w/ the laser instead of engrave - so I could use the power adjust pot on the machine to set laser power and the laser test button as on/off (except using the relay). Any reason this wouldn't/shouldn't work?

    Thanks!

  2. #2
    Join Date
    Sep 2005
    Posts
    1740

    Re: Full Spectrum Laser 40W 4th Gen - Dead USB

    That board is special for FSL and will be the only one to run their software. A good electronics guy could solder a new connector on it, (much cheaper than $750). The DB9 is usually used for serial connection what does your owners manual say?
    Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP

  3. #3
    Join Date
    Nov 2012
    Posts
    492

    Re: Full Spectrum Laser 40W 4th Gen - Dead USB

    Sorry your in trouble with that crap company there rip off artist

Similar Threads

  1. Full Spectrum Laser Dead again 4th time
    By Bigbird48 in forum Laser Engraving / Cutting Machine General Topics
    Replies: 5
    Last Post: 09-25-2013, 01:36 AM
  2. Full Spectrum Laser
    By Bigbird48 in forum Laser Engraving / Cutting Machine General Topics
    Replies: 82
    Last Post: 05-24-2013, 11:22 PM
  3. Full Spectrum Laser DEAD AGAIN
    By Bigbird48 in forum Laser Engraving / Cutting Machine General Topics
    Replies: 64
    Last Post: 05-20-2013, 07:46 PM
  4. Full Spectrum 40w Laser
    By oldguynewatthis in forum Laser Engraving / Cutting Machine General Topics
    Replies: 30
    Last Post: 02-04-2013, 02:47 PM
  5. Full Spectrum laser
    By kycolt in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 03-12-2010, 05:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •