[Tulak]

Hi
Can anyone help me please how to fix error code 042 on Mazak 640M?
Thanks

[navinbhas]

please share the complete alarm detail.(full line description from diagnosis alarms)

[Tulak]

please share the complete alarm detail.(full line description from diagnosis alarms)

Hi here is it:

42 SPINDLE PARAMETER MALFUNCTION

Cause
The parameters that have been transferred from the NC unit to the spindle amplifier during NC power-on are not correct.

Action
Require Mazak Technical Center or Technology Center to re-set the spindle parameters.


Thanks

[navinbhas]

Hi here is it:

42 SPINDLE PARAMETER MALFUNCTION

Cause
The parameters that have been transferred from the NC unit to the spindle amplifier during NC power-on are not correct.

Action
Require Mazak Technical Center or Technology Center to re-set the spindle parameters.


Thanks

There should be a data along with the alarm .

42 SPINDLE PARAMETER MALFUNCTION (****,************,***). Check in the diagnosis screen.
Also please check the 7 segment led status on power supply drive and spindle drive unit

[Tulak]

There should be a data along with the alarm .

42 SPINDLE PARAMETER MALFUNCTION (****,************,***). Check in the diagnosis screen.
Also please check the 7 segment led status on power supply drive and spindle drive unit

sorry, here are

42 SPINDLE PARAMETER MALFUNCTION ( , , ) C H M RedCause

What was told me that spindle has one flashing light errors are 37 and F4.

[navinbhas]

sorry, here are

42 SPINDLE PARAMETER MALFUNCTION ( , , ) C H M RedCause

What was told me that spindle has one flashing light errors are 37 and F4.

Well can you confirm the led status on the power supply drive. MDS-CH-CV-*** DRIVE