502,774 active members
4,248 visitors online
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Jul 2019
    Posts
    5

    Cnc parts name

    What is the name of this cnc parts?
    Where yo buy this parts?




    https://en.industryarena.com/forum/a...3&d=1562386530
    Attached Thumbnails Attached Thumbnails sketch-1562386501548.jpg  
    Last edited by Nyelenih; 07-06-2019 at 03:54 PM.

  2. #2
    Registered
    Join Date
    Apr 2016
    Posts
    654

    Re: Cnc parts name

    Quote Originally Posted by Nyelenih View Post
    What is the name of this cnc parts?
    Where yo buy this parts?

    Presumably, you intended to insert a photo. You didn't, we don't know what part you are asking about.

  3. #3
    Member
    Join Date
    Jul 2019
    Posts
    5
    The picture can see now?
    Attached Thumbnails Attached Thumbnails sketch-1562386501548.jpg  

  4. #4

    Re: Cnc parts name

    No, no picture.
    Jim Dawson
    Sandy, Oregon, USA

  5. #5
    Member
    Join Date
    Jul 2019
    Posts
    5
    Please help

  6. #6
    Member
    Join Date
    Jul 2019
    Posts
    5
    Please help, already attach link

  7. #7

    Re: Cnc parts name

    Quote Originally Posted by Nyelenih View Post
    What is the name of this cnc parts?
    Where yo buy this parts?




    https://en.industryarena.com/forum/a...3&d=1562386530
    That looks like a machine specific part, most likely only available from the machine manufacturer. It is possible that a local machine shop could make one for you.
    Jim Dawson
    Sandy, Oregon, USA

  8. #8
    Registered
    Join Date
    Apr 2016
    Posts
    654

    Re: Cnc parts name

    Quote Originally Posted by Nyelenih View Post
    What is the name of this cnc parts?
    Where yo buy this parts?




    https://en.industryarena.com/forum/a...3&d=1562386530

    If I had to attach a name to it, it looks to me like a custom 'lead nut.'

    It doesn't look like an 'off-the-shelf' part. Either proprietary (go to machine manufacture) or custom (go to machine shop).

    Gary

  9. #9
    Member
    Join Date
    Jul 2019
    Posts
    5
    Quote Originally Posted by GME View Post
    If I had to attach a name to it, it looks to me like a custom 'lead nut.'

    It doesn't look like an 'off-the-shelf' part. Either proprietary (go to machine manufacture) or custom (go to machine shop).

    Gary
    Ok thanks Gary

  10. #10
    Registered
    Join Date
    May 2016
    Posts
    157

    Re: Cnc parts name

    My guess is an anti-backlash lead screw nut. The two screws/bolts can be tightened to reduce slop between the nut and screw. Looks like nylon, designed for low loads and low speeds.

    Custom part, as Gary indicated. Or buy an off the shelf anti-backlash nut for that lead screw and make a bracket to attach it to the vertical axis moving part. Plenty of brass and delrin nuts similar to that on ebay and amazon.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •