I have 4 rou files I would like to convert to dxf if someone could be so kind to help me I would bee werry grateful.
I think its Enrouter 4 files if I do remember correct.
I have 4 rou files I would like to convert to dxf if someone could be so kind to help me I would bee werry grateful.
I think its Enrouter 4 files if I do remember correct.
Multicam 300___Enrouter 4 PRO
CNC 6040 Router Engraver Drilling and Milling Machine___Mack 3
You mean EnRoute 4 don't you? Like> https://www.axyz.com/us/enroute/
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP
Yes I think it is that, can you convert them?
I would really appreciate it.
It is files for this table we made.
Butt I forgot to convert them before we sold our machine.
Attachment 423684
Multicam 300___Enrouter 4 PRO
CNC 6040 Router Engraver Drilling and Milling Machine___Mack 3
No I can not, but do you have the gcode files perhaps on a USB drive or some other place?
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP
I could not open the one file "Svensk_Bondestil_Benk_Gravert_Witches.rou" with Enroute, it might be corrupt. But here are the other 3 exported from Enroute as DXFs.
No problem, You're lucky I even saw this post, this is the 1st time I've checked this forum in a very long time.
I took a closer look at the file I could not open, and it is actually a machine code file (some dialect of G-code). Guessing you may have accidentally over written the Enroute file outputting code to the machine once. Looking at it in Backplot I am guessing it is pretty much the same as the shape in the file "Svensk_Bondestil_Benk_B_400_H_370.rou" but with a little different tool pathing (no Idea if the scale is the same). The v-carving part is using many passes in the g-code file vs 1 pass in the Enroute one.