Re: Losing steps
Originally Posted by
upnorth
Any update on this? I think you were luckier than me. I had random issues with Mach 3 the entire time. At first because I was doing one offs I thought the problem was with me. When I started doing multiple part runs I found out that the issue was with Mach 3. Check for a loose coupling on the newly installed motor.
Do yourself a favor, go to either UNCNC or Mach4.
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP